You want to retrofit Apple CarPlay or Android Auto on your factory car radio without monitor? Then the smartphone monitor CPM102 is exactly the right product. This high-resolution 10'' touchscreen monitor allows them in almost any vehicle the integration of their smartphone and also the display of an optional rear camera.
Our smartphone monitor CPM102 with integrated smartphone interface is compatible with wireless Apple CarPlay® and Android Auto (please note the minimum requirements), making it a smarter and safer way to use your smartphone in the car.
Everything is operated via the intelligent voice control Siri or OK Google or on the 10" touchscreen monitor, which you can securely mount on the dashboard, for example, with an included foot holder.
Everything you want to do with your smartphone while driving can be done directly through this monitor with Apple CarPlay® or Android Auto. You can easily get directions or send and receive messages. If your vehicle has a factory Bluetooth hands-free system, you can operate it via our smartphone integration and use it to make phone calls. While navigating, you can listen to your favorite music via Spotify or your favorite radio station via a radio app - and still concentrate on the road.
Simply connect your smartphone wirelessly via WiFi to our monitor and off you go. Even more convenient, you can connect your Apple iPhone wirelessly via WiFi. Wireless Apple CarPlay® is possible from the Apple iPhone 5. The audio playback is fed via the audio AUX input (3.5mm jack plug) of your factory car radio. Alternatively, an FM transmitter is also integrated, which can also send the sound as an FM signal and be received by your car radio. In addition, a small speaker is integrated into the housing, which can play navigation messages, for example.
TECHNICAL DATA
DISPLAY
10" IPS LCD Touch Screen Monitor
9.2" / 23.4cm visible diagonal
Aspect ratio 24:9
Touch screen operation
Adjustable LED backlight
Extremely high resolution 1600 x 600
Brightness 750cd/m²
Contrast 1000:1
Clock frequency 60Hz
Vertical viewing angle 130
Horizontal viewing angle 150
Our monitors are subject to ISO 9241-307, pixel error class II
SMARTPHONE INTEGRATIONWireless Apple CarPlay Minimum requirement: iPhone 5 and higher
Wireless Android Auto Minimum requirements: Android 11, Android Auto 4.8 and WLAN 5GHz*. ATTENTION! Devices that only have WLAN 2.4GHz are not supported and are not compatible! Bluetooth
AHD dual dashcam Integrated front camera on the back of the monitor
Analog High Definiton 1080p (1920 x 1080 pixel resolution)
30fps frame rate
Viewing angle: 120° horizontal, 145° diagonal
System rear camera
Analog High Definiton - 1080p (1920 x 1080 pixel resolution)
30fps frame rate
Viewing angle: 120° horizontal, 145° diagonal
4P MINI-DIN system connector
Dimensions without butterfly holder: 23 x 23 x 32mm
Recorder
Recording resolution: 1080p+1080p or 720p+720p (adjustable)
Segment length: 1minute, 3 minutes, 5 minutes
Audio recording can be switched on
Parking lot mode with motion detection and time-lapse recording. 12h or 24h adjustable, low voltage protection at 11.8V
Memory card type: microSD (not included)
microSD speed class: Class 10 or higher
microSD memory capacity: min. 32GB to max. 256GB
Recording capacities: 32GB approx. 4.5 hrs, 64GB approx. 9.5 hrs, 128GB approx. 19 hrs, 256GB approx. 38 hrs, then the oldest recordings are overwritten.
Power on delay (ACC ON): 17 seconds
Power on delay in parking mode: 0 seconds
OFF delay (ACC OFF): 15 seconds
REAR VIEW CAMERA
The system rear camera is used as the rear view camera. No need to install another rear camera.
12 Volt switch input for activation
Immediate switchover to the system rear camera in full screen with auxiliary lines when reverse gear is engaged
Auxiliary lines individually adjustable
Switch off delay of 3 seconds when reverse gear is disengaged
Dashcam recording function is not interrupted in reverse camera mode
Image playback normal/mirrored adjustable
AUDIO OUTPUT
Audio output with 3.5mm jack cable
FM transmitter for alternative audio playback (87 - 108 MHz.)
integrated 2 Watt loudspeaker with own housing
OTHER
LINUX 4.9 OS operating system with 1GB memory
Apple CarPlay and Adroid Auto in full screen mode, or in half screen mode with simultaneous display of a camera (selectable)
SD card reader (Mirco SD)
USB-C input for power supply
USB-C wired power adapter with ACC ignition logic
Menu languages: DE, EN, FR, ESP, RU, JPN, CN, KOR
automatic switch on when operating voltage is applied
operating voltage 9V - 36V DC
current consumption ACC ON: 600mA@12VDC
current consumption ACC OFF: 8.1mA@12VDC
Current consumption in parking mode: 290mA@12VDC
Operating temperature: -20° to 70°C
Storage temperature: -30° to 80°C
Dimensions monitor (without base): 240 x 100 x 33mm (42mm with front camera)
dimensions of system hack camera: 23 x 23 x 32mm
Weight of monitor with base: 518g
SCOPE OF DELIVERY
10" (25.4cm) touch screen monitor
Foot mount
USB-C connection cable for power supply with +12V, ground and ignition (ACC), 320cm
AHD system rear camera, 1080p, with butterfly mount and 50cm cable
